Sign up for FlowVella
Sign up with FacebookAlready have an account? Sign in now
By registering you are agreeing to our
Terms of Service
Loading Flow
💫💫Station Sanitation Procedure
1. Separate clean equipment in closed containers or dry
sanitizers that are marked “Clean.”
2. Place any equipment that you are likely to need for your
next client between a folded towel or station mat before the service.
3. As you use each piece of equipment, remove it from
under the towel or mat and place it on top.
Note: If you drop an implement during the service,
place it in the dirty implement container and then washyour hands.
4. Upon service completion, place any equipment that has
been used in the dirty implement container. Unused
equipment, kept separate from the dirty tools on top of
the towel or mat, is considered to be clean and may be
used on your next client.
5. Depending on the regulations in your municipality,
you may need to spray scissors, clippers, and metal
implements with a germicidal, anti-viral spray.
6. Depending on the regulations in your municipality, you
may need to spray the vinyl or nylon shampoo/client
cape with a germicidal, anti-viral spray. (Nylon capes may need to be laundered instead.)
Safety and Sanitation
💫💫Daily Station Sanitation
Each day, perform the following sanitation steps:
• Clean all mirrors.
• Clean the station.
• Sanitize the chair, paying special attention to the back
and chair base.
• Wash out the garbage can or change the liner.
In addition:
• Place the chair in the forward position when not in use.
• Always clean the drain catch of the shampoo bowl afteruse.
• Wash your hands before servicing clients.
💫💫Equipment Sanitation Procedure
At the end of each service, place all used or dirty equipment together in the dirty equipment container. Sanitize this
equipment at the end of the day, or when you have
time between clients. The general procedure for sanitizing
equipment is as follows:
1. Remove hair and other debris from implements.
2. Wash implements with soap or shampoo and water.
3. Immerse the implements in the wet sanitizer for 10
minutes.
4. If you are going to use an implement immediately, rinse
off the disinfectant solution.
5. Let other implements dry overnight, wrapped in a clean
towel. Place brushes face down as they dry to assure thatwater does not remain in the brush.
Note: Some municipalities may require that a formalin/formaldehyde pill be placed in a salt shaker in each
drawer or cabinet. As the pill crumbles, it releases
formalin, which can kill contaminants, into the station.
5
Safety & Sanitation